Showcase Projects

Rock Australia – High Reach Drill

Commissioned in 2008 WT Hydraulics designed and fitted the control system and hydraulic circuit to operate an Atlas Copco Feed Rail from a Kato Rough Terrain Crane.

All of the drilling, rod handling and auxiliary functions, including latching of the Rotation Percussion and Feed functions and RPCF Rotation Pressure Controlled Feed, were controlled from the Crane cabin by two joysticks mounted on either side of the operators seat and an IQAN Can Bus control system with a single master module and three power modules.

The original crane hydraulic pumps were replaced with a double HPR105 Linde pump which were plumbed into the existing crane circuits as well as the new feed rail and auxiliary circuits that were operated from VPL Apitech directional control valves.

DISTRIBUTORS FOR

STOCKISTS OF

CONTACT DETAILS

10 Williams Street
KALGOORLIE
WA 6430
Phone: 08 9022 7220
Fax: 08 9022 7223
Email: orderdesk@wthydraulics.com.au admin@wthydraulics.com.au kraige@wthydraulics.com.au